The motor pumps used especially to connect the fire-fighting hose. The motor pumps used especially to pump the water with sand and small stones, clay, various fibers etc. under high pressure.
Technical characteristics
Characteristics |
Motor pump TANKER-20PZH |
Motor pump TANKER-16PZHM |
Motor pump TANKER-30PZH |
Motor pump TANKER-18PZHM |
Motor pump TANKER-50PZH |
Diameters of pipelines |
40×40, 25×25 mm |
40×40, 25×25 mm |
50×50, 40×40 mm |
50×50 mm |
80 × 65, 40 × 40 mm |
Pump head |
55 m |
72 |
55 m |
80 m |
70 m |
Performance |
335 lpm, 20 m³ /h |
265 lpm, 16 m³ /h |
500 lpm, 30 m³ /h |
300 lpm, 18 m³ /h |
835 lpm, 50 m³ /h |
Suction head |
7 m |
7 m |
7 m |
7 m |
7 m |
Shaft seal material |
Silicone carbide |
Silicone carbide |
Silicone carbide |
Silicone carbide |
Silicone carbide |
Engine type |
6.5 horse powers (Lifan, Yanmar, Yamaha by order) |
13 horse powers (Lifan, Yanmar, Yamaha by order) |
|||
Fuel |
DF — Diesel or MT petrol |
Scope of delivery
- Motor pump TANKER
- Welded 2-wheeled spatial frame structure.
- Quick disconnect joints with fittings for delivery-suction hoses
- Operation manual/data sheet.
OPTIONS: filter bed, 4-wheeled trolley with pneumatic tyres, electrical starter, battery, liquid heater, delivery-suction hoses.
Before shipping all motor pumps should pass mandatory quality control and control tests that is why the motor pump is supplied with a small amount of fuel in the tank and oil in the crank case. In case of air delivery — it is necessary to specify at the order that oil and diesel fuel should be discharged from the tank after tests.