Motor pump TANKER 049К for acid and solvent pumping

The self-priming motor pump TANKER 094K is used to pump various fluids for which the pump in operation is used. Viscosity must not be more than 6 cm² /s and the density must be less than kg/m³. The special feature is that the self-priming pump with face seals is used for pumping special-purpose fluids with.

 The motor pump frame is made using modern technologies such as high-precision laser cutting, high-tech welding by modern devices based on digital inverting technologies Synergic-EWM, the powder painting by modern materials. Stainless steel quick disconnect joints.

Technical characteristics

* Battery is supplied by a separate order. Special engine version with electric starter.

** Special motor pump version with a petrol engine, please, specify the operation conditions at purchase.

*** by order the motor pump may be equipped by the pump 1АSVN-80АМ (S,R,K)-U2, where:

1— modification;

A — unit;

SVN — self-priming vortex pump;

80 — suction and discharge outlet diameter, mm;

A — modernization index;

M — secondary seal (lip seal);

S — food-related version (no conservation);

R — for solvent pumping;

K — for acid pumping;

U2 — climate version and operation location category under GOST 15150-69.

Operating ranges of self-priming pumps 1svn-80am and units 1asvn-80am

Design features of the unit

The self-priming vortex pump SVN 80 is different from the pumps with the same application mostly by the fact that it is a single-stage pump. It is produced with both left and right rotating directions. The direction depends on whether the pump will be installed on the vehicle with a diesel or petrol engine. If necessary, it is not very difficult to reinstall it from the left to the right direction and vice versa.

The stainless steel and aluminum alloys are used for production. The turbine wheel is made of the aluminum alloy especially to avoid spark striking when fuel products are being pumped.

Modification

• AMS is used to pump the drinking water and the food-grade alcohol. It is most frequently used in the agriculture for watering works and it is often installed on the water dispenser.
• AMR is used for work with combined solvents, simple and complex ethers.
• AMK is used to pump acids and ketones.
• AVM is designed to pump the special product.

Scope of delivery

• Motor pump Tanker 049.
• Welded 2-wheeled spatial frame structure.
• Quick disconnect joints with fittings for delivery-suction hoses NB 75.
• Operation manual/data sheet.

Before shipping all motor pumps should pass mandatory quality control and control tests that is why the motor pump (diesel or petrol one) is supplied with a small amount of fuel in the tank and oil in the crank case. In case of air delivery — it is necessary to specify at the order that oil and diesel fuel should be discharged from the tank after tests. Options: *hoses, dispensing valve, filter, filter bed, TS meter, 4-wheeled trolley with pneumatic tyres R13., electric starter, battery, fluid heater, delivery-suction hoses.

All models and their designations

Engine options

In its basic version the motor pump TANKER-049 is supplied with a reliable diesel engine, but by special order the motor pump can be supplied with petrol and diesel engines: LIFAN, HONDA, LOMBARDINI DIESEL, LOMBARDINI KOHLER, KIPOR, Greenfield, COMMAND PRO, ROBIN SUBARU, YANMAR, KAWASAKI, HATS, BRIGGS & STRATTON, PETTER, NEMA.