The pumps with a vast scope of application are used all over the world in all industrial areas. The pumps TANKER D are self-priming rotating vane pumps with an internal bypass valve, a rotor with sliding vanes made from special self-lubricating material.
Pump material — high-strength cast iron. Due to its high efficiency, the pumps are capable of pumping viscous and volatile fluids at small consumed power. The viscosity of the pumped fluid up to 4,125 cSt (20, 000 SSU) or 40 cm²/sec. Pumped fluid temperature — up to 145 degrees. The pumps are self-priming.
Technical characteristics
|
Model |
Pump rate, lpm |
Head, atm |
Capacity, kW |
Input / Output |
Revolutions |
|
TANKER-D 65 |
500 |
4 -7 |
4 |
65 / 65 |
650 |
|
TANKER-D 65 |
391.6 |
4 -7 |
4 |
65 / 65 |
500 |
|
TANKER-D 65 |
310 |
4 -7 |
4 |
65 / 65 |
400 |
|
TANKER-D 65 |
143.3 |
4 -7 |
4 |
65 / 65 |
275 |
|
TANKER-D 80 |
1000 |
4 -7 |
7.5 |
80 / 80 |
650 |
|
TANKER-D 80 |
760 |
4 -7 |
7.5 |
80 / 80 |
500 |
|
TANKER-D 80 |
600 |
4 -7 |
7.5 |
80 / 80 |
400 |
|
TANKER-D 80 |
411.6 |
4-7 |
7.5 |
80 / 80 |
275 |
|
TANKER-D 100 |
1900 |
4 -7 |
18.5 |
100 / 100 |
650 |
|
TANKER-D 100 |
1530 |
4 -7 |
18.5 |
100 / 100 |
500 |
|
TANKER-D 100 |
1148.3 |
4-7 |
18.5 |
100/100 |
400 |
|
TANKER-D 100 |
1033.3 |
4 -7 |
18.5 |
100 / 100 |
275 |
Pumps can be equipped with the following units
- Explosion-proof or general industrial electric engine.
- Internal combustion engine — diesel or petrol one.
- Hydraulic motor.
Pumps has the following types of connection with the units
- cast iron sleeve
- belt drive
- reducing gear box with sleeves.
Pumped fluids variants
- Petrochemical industry: cleaned fuel, oil pumping, consistent lubricants.
- Food industry: Chocolate, syrups, molasses, food oils.
- Paper&pulp industry: Black liquor, sodium silicate
- Chemical industry: Solvent transfer (VOCs), Grease, Fire-fighting foam (aqueous film-forming foam), Creosote Wax, Glues, adhesives, Asphalt.
- Pumps for special operation conditions: Petrochemical industry — lubricating oil packaging, marine applications — desorption, liquid and POL pumping, industrial processes— alkalis, solvents (volatile organic compounds), asphalts, molasses, polyol.
- Pumps for polluted fluids and fluids with abrasive materials: Waste solvents (volatile organic compounds), used oil products, polygraphic ink, paints, oil paints, paper&pulp industry — calcium stearate.
- Industrial processes— Saturated polyol, magnetic tape – ferric oxide, crude oil.
- STAINLESS STEEL 316 PUMPSFood industry: Corn syrup, chocolate, fruit juices.
- Paints: Rubber latex emulsion SNP, soap sulphonic acid, liquid soap
Industrial processes: Industrial solvents (volatile organic compounds), sodium hydroxide, resins.
