Separator filter for diesel fuel MKT TANKER-5 FSM “mobile”

At present flawless and continuous operation of transport vehicles is a key factor of the companies’ success, traffic safety and good economic benefit for the companies as well as the sustainability of family budget of private individuals. Flawless and long-term operation of the engines of our cars, generators, special equipment as well as boilers, burners requires clean fuel. To deliver the produced fuel in a cleaned form to the end customer is a very difficult task. Fuel is subject to several stages of pumping, storing in various containers, and unstable climate inevitable causes the occurrence of condensation water, and as a result fuel goes to water.

Key characteristics of mkt tanker-5 fs

• Cleaned fuel: diesel fuel.
• The degree of fuel cleaning from mechanical impurities: 1, 5, 10 or 25 micron.
• Water separation or absorbing from 95% to 99.9%.
• Filtering element metal flask with the volume of 15 liters or for duplex models 15x2=30 liters.
• Pump performance TANKER-100 l/m and TANKER-150 lpm
• Mechanical or electronic (by order) meter is equipped with two metering devices: current (released by the button) and accumulated (not released) separator’s service life (error ±0.5%).
• Operation at the temperature from — 40С to +80С, Maximum estimated pressure 10 bar.
• Manual drainage valve, manual vent valve, sight glass, gauges to control filter contamination, oil and petrol resistant hoses — 10 meters, ball valves, coarse filter at the pump input.
• The version on the 2-wheel trolley or 4-wheel trolley or on the frame without wheels.

OPTIONS: water presence sensor, fuel heater, pressure difference gauge, electronic fuel doser, GSM controller, authorization for fuel dispensing by electronic keys or cards, manual or automatic fuel dispensing gun, rotary connectors, quick disconnect joints, hoses of any length, final cleaning filter, etc.

Application area of mkt tanker-5 fs

• Department, private and commercial filling stations, fuel dispensers for fueling any type of equipment.
• Systems for supply, bunkering, dispensing, filling/discharge and pumping of fuel.
• Air, petrol and diesel oil tank farms, storages, stock buildings and refuellers.
• Marine fueling quays.
• Fueling systems for large diesel engines.

Basic versions