Filtering unit TANKER for cleaning of diesel fuel, kerosene, oil or petrol

Mobile and stationary filtering units TANKER are intended for fine cleaning of diesel fuel, oil, kerosene or petrol. Various component parts are used depending on the set task, performance and operation conditions.

The following filter are used as a main filtering element

Separator filter TANKER – 5	Filter FBO — RACOR produced in the USA Parker-filtration.	Filter SEPAR	Filter GESPASA	Filter PIUSI

As well as other filters from various manufacturers. Filters are selected and used depending on the customer’s requirements and statement of work.

The tanker units for cleaning fuel and other liquids are supplied in various sets and versions

• As a modular filtering element for independent installation at the facility.
• On the brackets for a convenient location at filling stations or fuelers.
• As a part of a mobile filtering unit with a pump and a metering device.
• In a stationary version for being installed in the tank park at large filling stations, oil tank farms or at oil product storages.
• The units can have different number of successive and parallel cleaning steps from 1 to 5 and higher.

Key characteristics

• Cleaned fuel: diesel fuel, petrol, kerosene, oil
• The degree of fuel cleaning from mechanical impurities: 1, 5, 10 or 25 -30 micron, the first cleaning step — 50, 100, 200 micron.
• Water separation or absorbing from 90% to 99.9%. (the purification degree depends on the water content in fuel and the filter used).
• Filtering element metal, aluminum or plastic flask
• The unit performance40 — 1,000 lpm depends on the type of the pump used and operation conditions. We use self-priming pumps: suction head — 2-7 m, pump capacity — to 30 m, electric power supply 12V, 24V, 230V, 380V or diesel motor drive.
• Mechanical or electronic fuel meter.
• Gauges for monitoring pressure difference at the filtering element.
• Operation at the temperature from — 40С to +60С, Maximum estimated pressure 10 bar.
• Manual drain valve, sight glass (for filters in a metal flask), contamination indicator, oil and petrol resistant hoses, ball valves.
• The version on the 2-wheel trolley or 4-wheel trolley or on the frame without wheels.

OPTIONS: electronic water gauge, filter flask heater, electronic fuel doser, GSM controller, authorization for dispensing by means of electronic keys or cards, manual or automatic fuel dispensing gun, rotary connectors, and many other things.

Application area

• Department, private and commercial filling stations, fuel dispensers for fueling any type of equipment.
• Systems for supply, bunkering, dispensing, filling/discharge and pumping of fuel.
• Air, petrol and diesel oil tank farms, storages, stock buildings and refuellers.
• Marine fueling quays.
• Fueling systems for large diesel engines.

Operating principle

A separator filter operates in a manual mode. One should connect the hoses to the process and start the pump, the pump will intake fuel and pump it through a filtering element, the meter will show the amount of pumped and cleaned fuel. After pumping and cleaning are finished, it is necessary to turn off the pump, turn off the valves, reel the hoses. Using the sight glass check the presence of water and mechanical additions, if necessary, drain the slime with the help of a drainage valve.

Basic versions